|
BS EN 13709-2003 |
工业用阀.钢制球阀、球状截止阀和止回阀 |
(Industrial valves - Steel globe and globe stop and check valves) |
|
BS 1552-1995 |
一类、二类和三类燃气用手动截止阀规范 |
(Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar) |
|
BS 7461-1991 |
带有流量调节器、闭路开关指示、闭合位置指示器开关或气流量控制的电动自动气体截止阀规范 |
(Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control) |
|
BS 1010-2-1973 |
给排水设施用排放旋塞和截止(旋压式)阀规范.第2部分:排放旋塞和地面上用截止阀 |
(Specification for draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves) |
|
BS 1873-1975 |
石油、石油化学及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及对接焊端)规范 |
(Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries) |
|
BS 3457-1973 |
水龙头与截止阀座垫圈材料规范 |
(Specification for materials for water tap and stopvalve seat washers) |
|
DIN 4817-1-1981 |
液态气的截止阀.概念.安全技术要求.检验.标志 |
(Shut off valves for liquefied gases; definitions, requirement, testing, marking) |
|
DIN 86251-1998 |
造船用铸铁制带法兰的DN15至500的截止阀 |
(Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500) |
|
DIN 86260-1998 |
造船用炮铜制带法兰DN15至500的截止阀 |
(Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500) |
|
DIN 85003-4-1997 |
造船用管件的交货技术条件.第4部分:截止阀 |
(Technical specifications for valves for shipboard use - Part 4: Stop valves) |
|
DIN 85003-6-1997 |
造船用管件的交货技术条件.第6部分:手动截止阀 |
(Technical specifications for valves for shipboard use -Part 6: Hand operated gate valves) |
|
DIN 3399-1986 |
低压截止阀.安全技术要求和检验 |
(Gas low-pressure cut-off valves; safety requirements, testing) |
|
DIN 3160-1974 |
公称压力25的冷却剂循环直通截止阀 |
(Through-valves for refrigerant circuits, nominal pressure 25 bar) |
|
DIN 3161-1974 |
公称压力25的冷却剂循环角形截止阀 |
(Elbow valves for refrigerant circuits; nominal pressure 25 bar) |
|
DIN 4056-1992 |
水管.街道地下截止阀门的路盖.DVGW技术规范 |
(Water pipelines; valve boxes for stop valves; DVGW code of practice) |
|
DIN EN 1643-2001 |
燃气燃烧器和燃气用具用自动截止阀的阀门检验系统 |
(Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000) |
|
DIN 86500-1968 |
船用螺纹连接的截止阀和闸阀等概述 |
(Valves and Gate Valves with Screwed Connections; Survey of Types for Shipbuilding) |
|
DIN 86254-2000 |
船只及造船技术.超轻型截止阀DN32-DN125(PN10) |
(Ships and marine technology - Shut off valves extra light duty DN 32 to DN 125, PN 10) |
|
DIN EN 13709-2003 |
工业用阀.钢制球阀、球状截止阀和止回阀 |
(Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002) |
|
DIN EN 1213-1999 |
建筑阀门.建筑物中饮用水供应用铜合金截止阀.试验和要求 |
(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999) |
|
DIN 86266-2002 |
船舶和航海技术.用手夹紧和法兰连接的超轻型法兰的截止阀 |
(Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10) |
|
GB/T1856-1993 |
船用法兰铸铁单排排出截止阀箱 |
Marine flanged cast iron single arrangement exhaust stop box valve |
|
GB/T1854-1993 |
船用法兰铸铁单排吸入截止阀箱 |
Marine flanged cast iron single arrangement suction stop box valve |
|
JIS B8605-2002 |
致冷装置的截止阀 |
(Stop valves for refrigerants) |
|
JIS F7379-1996 |
造船.卡套式30K黄铜截止阀 |
(Shipbuilding -- Brass 30K stop valves with bite joint(s)) |
