Stainless steel ball valve repair
To better maintenance of stainless steel ball valve, stainless steel ball valve should have some knowledge of: stainless steel ball valve is rotated 90 degrees only need the operation and a small torque can be closed tightly. The body cavity of full equality for the media to provide a little resistance, through the flow channel. Stainless steel is usually considered the most suitable valve opening and closing done directly used, but recent development has been designed to make it a throttle valve and flow control purposes. The main characteristics of stainless steel ball itself is compact, easy operation and maintenance for water, solvents, acids, and natural gas work in general media, but also for poor working conditions of media, such as oxygen, hydrogen peroxide, methane and ethylene . Ball valve can be integral, it can be modular, so the chemical industry has been widely used. This type valve in the pipe should normally be installed horizontally. Stainless steel ball valve damage mainly in the sphere of the damage and destruction of the valve seat seal, which extends to the twisted deformation of the stem, so the main content of stainless steel valve repair and valve seat in valve repair, addition of the steel valve stem repair. In general, stainless steel ball valve maintenance costs are relatively large.
Maintenance of detailed technical information on stainless steel ball valve please contact us (13515194999)